Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Fuel pump location (https://www.offshoreonly.com/forums/general-q/353736-fuel-pump-location.html)

LTZCrew 05-04-2018 05:09 PM
Originally Posted by AusScarab29 (Post 4624877)

Thank guys
Ok so I will be running the pump after the seperater /filter
what size line are you running from the pump to the fuel rails
i think the Whipple instructions say min 3/8 I/D line

AusScarab29 05-04-2018 05:26 PM
Yes whipple do say to run 3/8 line they also supply 3/8 fittings this whipple kit is for a stock 496.
my engine will be around 800 hp so i was thinking of running 1/2 inch line to the rail


All times are GMT -5. The time now is 03:08 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.