Offshoreonly.com - Raw water pump, which fitting is the inlet?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Raw water pump, which fitting is the inlet? (https://www.offshoreonly.com/forums/general-q/35381-raw-water-pump-fitting-inlet.html)

voodoo

10-22-2002 10:14 PM

Raw water pump, which fitting is the inlet?

I have a Gen VI carbed 502 Mag with the raw water pump/fuel pup combo. Which port is the inlet from the drive, the top or bottom?

ragtop409

10-22-2002 10:37 PM

depemds on the rotation of your motor but the top goes to the out drive in a normal set up, unless some one here sais difrent of corse. Charlie

Scott

10-23-2002 07:16 AM

1 Attachment(s)

I put a X on the intake hose. this is a 98 gen VI 500hp and yes to the critics the motor mount has been changed to a offshore mount!:rolleyes:

voodoo

10-23-2002 07:30 AM

Many Thanks! I thought that was right but checking first never hurts.

All times are GMT -5. The time now is 08:43 AM.