Go Back  Offshoreonly.com > Technical > General Q & A
Fast fuel injection >

Fast fuel injection

Notices

Fast fuel injection

Thread Tools
 
Old 05-17-2018, 09:29 AM
  #1  
Registered
Thread Starter
 
Join Date: Jul 2005
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default Fast fuel injection

Has anyone tried the fast fuel injection system{ 303002rb] its a dual throttle body on a supercharged 557" big block. Looking to get rid of the dominators and switch to fuel injection.
harley572 is offline  
Old 05-17-2018, 08:10 PM
  #2  
Registered
 
Join Date: Oct 2013
Location: Salisbury N.C.
Posts: 487
Received 23 Likes on 17 Posts
Default

I think you would be farther ahead to use the Holley Injection , FAST doesnt have much in the way of support in the Marine end of things.
dunnitagain is offline  
Old 05-18-2018, 10:50 AM
  #3  
Platinum Member
Platinum Member
iTrader: (1)
 
14 apache's Avatar
 
Join Date: Apr 2005
Location: Northport N.Y.
Posts: 2,139
Received 10 Likes on 10 Posts
Default

I ran the fast efi with msd box it was a nightmare would not buy there stuff again. Go with Holley.
14 apache is offline  
Old 05-18-2018, 10:59 AM
  #4  
VIP Member
VIP Member
 
BBYSTWY's Avatar
 
Join Date: Jul 2017
Location: Sodus MI
Posts: 1,650
Received 249 Likes on 125 Posts
Default

Care to elaborate apache?? I'm also curious about FAST...what was a nightmare?? tuning, performance, customer support?? Would running their dist. tied in with the fuel injection have helped your situation??
BBYSTWY is offline  
Old 05-18-2018, 05:26 PM
  #5  
Platinum Member
Platinum Member
iTrader: (1)
 
14 apache's Avatar
 
Join Date: Apr 2005
Location: Northport N.Y.
Posts: 2,139
Received 10 Likes on 10 Posts
Default

The box is sensitive to rf noise and a msd box is not good for that has a lot of RF. I had to have a lot of capacitors to help the problem out even used resistor plugs to help with the problems. Even the pickup for the crank trigger was close to the alternator was a problem. If it had Hall triggers it may of not happened. I am not the only one with these issues. Maybe the newer ones are different but I would stick with a holley and do individual coils or a batch fired coil. Took two weeks to figure out what was going on with it would sit there and just shut off like it hit the revlimiter.
14 apache is offline  
Old 05-18-2018, 08:57 PM
  #6  
Registered
 
Tinkerer's Avatar
 
Join Date: Jan 2002
Location: ALTO, MI
Posts: 4,612
Received 7 Likes on 6 Posts
Default

Go with the Holley.
Easy to install and with the help that is available here it is easy to set up.
Tinkerer is offline  
Old 05-19-2018, 04:55 AM
  #7  
VIP Member
VIP Member
 
BBYSTWY's Avatar
 
Join Date: Jul 2017
Location: Sodus MI
Posts: 1,650
Received 249 Likes on 125 Posts
Default

do they make a holley kit that can be run in a dual setup on a roots blower?? I thought last I checked there wasn't any roots blower options??
BBYSTWY is offline  
Old 05-19-2018, 06:00 AM
  #8  
Registered
Thread Starter
 
Join Date: Jul 2005
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

holley does not make a kit to go on a roots blower. any suggestions on wich holley controller to use.
harley572 is offline  
Old 05-19-2018, 06:14 AM
  #9  
VIP Member
VIP Member
 
BBYSTWY's Avatar
 
Join Date: Jul 2017
Location: Sodus MI
Posts: 1,650
Received 249 Likes on 125 Posts
Default

That's what I thought...didn't mean to hijack your thread btw...was just trying to get some clarification for everyone
BBYSTWY is offline  
Old 05-19-2018, 05:45 PM
  #10  
GPM
Registered
 
Join Date: Mar 2004
Location: Pa
Posts: 2,663
Received 80 Likes on 58 Posts
Default

Just an opinion here. Download the software for the different companies and see which one you want to deal with. None of the systems are as easy as the Salesmen claim. Tuning real time is a plus.
GPM is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.