Hey guys first off thank you for any help with this. I rebuilt my 2003 525 EFI over the winter and now the alarm is going off and the boat won't rev past 4000 rpm and I can hear it breaking up. I have not scanned it yet I did borrow a friends Rinda can tool. I have two questions first where do I plug in the scan tool and is it the four pin connector? Next question is after you remove the cam sensor which looks like a distributor do you have to do any kind of learn process kinda like sync the timing to the ecu? Sorry for being new to the diagnostic boat world.

Thanks guys I truly appreciate it!
Paul