blue64drop

scott,

i did get your mails. thanks a lot. i have my work cut out for me.

todd,

if you could find the pic of the back of the motor that'd be great. does the bracket on the EFI motor have more BS on it for the EFI? mine only has the relay, the breaker, and i'd have to add the harness.

thanks for all your help guys and once again, if anyone has one to sell i'd love to buy it..

Ned

blue64drop

scott,

is that the oil cooler mounted on the back of the motor? i HATE where mine is mounted(right next to the oil pan)

do you have a separate pewer steering\oil cooler

thanks.
Ned

pachangalpina

Ned, no efi stuff on bracket. I need your address to send the harness to.

Todd

pachangalpina

Ned, check out this linkBRACKET Tis may be the same as the one that Scott had the pic of. It seems to hold all that you need, the circuit breaker, mercathode, solenoid, and connector. I believe that any that bolt to the back on the head will work for you.

Good luck

blue64drop

thanks todd,

i just pm'd you my address. now i need yours so i can send you a check.

i looked @ that bracket before scott had posted his pics. i think that will work. man, it will be nice to have all that wiring away from the front\top of the motor.

-Ned

Scott

Ned,
I'm supprised you received the pictures! Every email that I sent came back to me as undeliverable file too large Glad I could help.
Yes that is the oil cooler mounted behind the motor and I have a picture of the P.S. cooler below. These pictures were taken last year before my rebuild so if you guys see things like nasty motor mounts and whatever they have been replaced and look brand new. Not to mention they run great