Msd distributor advance stop bushings
Can anyone tell me the sizes of the advance stop bushings on an msd distributor ? I can’t tell what color it is because it’s a little rusty. Also , what spark plugs would you use on a 454 with B&m 250’s? Got this old project boat almost ready,,,, |
My bushings are .430 |
Assuming BBC rect port heads, I would run AC MR41T plugs.
|
Thanks for the reply, I will try them. Any idea on the distributor bushings? I took my msd apart yesterday,trying to figure out the timing curve. |
Also, yes they are bbc rectangle heads, were mercury 400,s , now mabey 550 h.p.? |
The kit should have all the specs https://www.summitracing.com/parts/msd-8464
|
Thank you Griff, I’m going to look at it, I checked my plugs, they are NGK # 7 |
Originally Posted by Scscoripion
(Post 4637723)
Thank you Griff, I’m going to look at it, I checked my plugs, they are NGK # 7 Stock NA Merc engines run an AC MR43T or NGK BR6FS. Merc 525SC/600SC run an AC MR41T |
I will let u know tomorrow about the bushing sizes, working on msd distubuter tomorrow and I have all the bushings. |
That’s good ! Do you have any idea what curve I should run with 8.6 compression,B& m 250’s , 1000 cfm Holly’s, stainless marine headers, 24 pitch 4 blade Cleavers? |
All times are GMT -5. The time now is 09:58 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.