Offshoreonly.com

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Efi (https://www.offshoreonly.com/forums/general-q/358140-efi.html)

Wildman_grafix

12-20-2018 07:53 AM

https://cimg5.ibsrv.net/gimg/www.off...11294a28ef.jpg

Quote:

Originally Posted by Boatally Insane (Post 4664473)

My M4 bracket did move the alternator to the left (port) side. It's under the blower. I re-clocked mine as well and mounted the intercooler on the floor... ;)

https://cimg6.ibsrv.net/gimg/www.off...e7df667a33.jpg

This has to be the cleanest inter-cooler set up I have seen on a centrifugal type of blower.

ICDEDPPL

12-20-2018 11:05 AM

Quote:

Originally Posted by BUP (Post 4664577)

Moroso PRI booth 2018 haha

sutphen 30

12-20-2018 11:12 AM

Quote:

Originally Posted by GPM (Post 4664578)

Any chance of that getting wet when a hose breaks

a hose comes off,,everything gets wet,,no matter where stuff is.

GPM	12-20-2018 12:53 PM

Might be submerged,

14 apache

12-20-2018 04:49 PM

Quote:

Originally Posted by ICDEDPPL (Post 4664164)

ATI makes some built in trigger wheels..
ATI - Crank Trigger Shells

Would this be a better option so pulleys belts and such don`t have to realigned due to the extra wheel?

You can machine the back of the balancer to go on further and make a spacer for the crank washer.

Tinkerer

12-20-2018 07:23 PM

That bracket in the picture for mounting the coils under the spark plugs is what I am leaning toward. I will have to have some aluminum bent up and machined to fit the coils.

ICDEDPPL

12-21-2018 08:45 AM

The lower alternator bracket was on the red HRE engine, they can get those brackets.
The Coil bracket under the headers was at the Haltech display but I haven`t been able to find it anywhere. possibly something they made for the show..

All times are GMT -5. The time now is 09:45 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page