rebuilt 516
01-10-2019 | 03:57 PM
#1
Thread Starter
Registered
Joined: Feb 2018
Posts: 118
Likes: 4
From: Paris
rebuilt 516
I have 1 516 mark IV bowtie / hiperf pass, heads dart pro 1 325 cc 2.30 valve intake ,1.880 valve exhaust . I need to talk to someone about a good cam selection , with lifters and spring please and thank you
01-10-2019 | 09:54 PM
#2
Registered
Joined: Dec 2009
Posts: 155
Likes: 42
From: Midland, MI
01-11-2019 | 01:00 AM
#3
Charter Member # 55
Joined: Oct 2000
Posts: 20,244
Likes: 2,491
From: Omaha/LOTO
Call Eddie Young at Young Performance Main - Young Performance Marine
I would say a Crane 168741 cam and Isky 8005 springs.
I would say a Crane 168741 cam and Isky 8005 springs.
01-11-2019 | 05:10 AM
#4
Gold Member
Joined: Oct 2005
Posts: 11,691
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Bob lol
Get all your info and specs in hand and start calling cam manufacturers most will punch it in and see where you should be, need something that is not a drag car setup, then chose what averages out and most likely there is a shelf cam for you. Having head flow numbers of what they actually flow is a great start, not what the internet says.
Get all your info and specs in hand and start calling cam manufacturers most will punch it in and see where you should be, need something that is not a drag car setup, then chose what averages out and most likely there is a shelf cam for you. Having head flow numbers of what they actually flow is a great start, not what the internet says.
