I do remember MT using the 4035 and had perfect fit. Would be interesting to call comp on dif btwn the 4021 and 4035. Possible narrower or wider rocker? Not sure. I was gonna get the jomar 1114's for promaxx heads but I have crane rockers. Not sure if that's gonna be an issue or not. Ideally shaft mount. By the time it's all said and done not a bunch more in cost and get perfect all the way around. Can't remember the ones Rookie was talking about but believe they're made in Australia??? Much less than most other good shaft mount.

F2 do u need two piece valve cover or will the Hardin style cover clear without any grinding. OT it's to bad when you can't trust techs anymore or can you. The 088's are definately 26deg and the eq's 24 deg. Let alone other factors. You ever take a straight edge across your rocker studs. BBC's are here there and everywhere like a bad hair day. Nothing like SBC. You'll hear of guys using girdles that were built for GM heads and claim they work on brodix and dart etc also. I remember black Baja swearing he used like one fits near all. Not my way of doing things. Whoever sells eq heads should tell you exactly what to use. Period. Not what ones not to use. You'll notice same BBC girdle manufacturer with multiple different part numbers due to the difference in heads. Improper girdle alignment can be more detrimental than none at all.

I dont doubt one bit some can be mix matched. A lot of relabeling goes on also but no biggy sclong as you get the right ones. Example I believe jomar makes for Howard's and so on.

Heck ck I think it was ezstripper or some other OSO member who was using the cheap eBay ones on multiple different heads. Or at least went from 088's to darts anyway with no issues. Makes no sense given the difference in the heads but...

Get the 4035's that for sure work if you go comp.

Just to let you know I just found an add on the comp 4021's and they were advertised for BBC brodix-2 heads. But....