DUI 8 pin module
02-22-2019 | 06:58 AM
#1
Thread Starter
Registered
Joined: Apr 2018
Posts: 134
Likes: 1
DUI 8 pin module
I'm wondering if this is a good up-grade vs a stock module, I'm not running it with MEFI it is a stand alone EST ignition. The stock curve works for me and larger cams so not really looking to replace the ignition to a programmable just yet, anyone used them ???
02-22-2019 | 02:25 PM
#2
Registered
Joined: Sep 2006
Posts: 476
Likes: 3
From: brewster ma
I had awful experience with dui, I would NEVER run anything from them!!!
02-22-2019 | 02:35 PM
#3
Registered
Joined: Oct 2013
Posts: 2,888
Likes: 148
From: SF Bay Area
02-22-2019 | 03:55 PM
#4
Registered
Joined: Sep 2006
Posts: 476
Likes: 3
From: brewster ma
first time I ran my brand new motors the part under the rotor that senses when to break the spark was never secured to the shaft, partially melted 3 pistons!! A couple of years later, both distributors failed within one day of each other, the bushings were sooooo sloppy that the rotors both went up and destroyed the hei caps!! Also had pickup sensor failures along the way, if you had these problems, would you ever run them? I rum msd on my present boat and yes I carry spare boxes!!
02-24-2019 | 12:20 PM
#6
Thread Starter
Registered
Joined: Apr 2018
Posts: 134
Likes: 1
