Polishing Headers?
03-05-2019, 05:24 PM
#1
Registered
Thread Starter
Polishing Headers?
Hey Guys..I have a few sets of Stellings I'd like to polish up and remove some fine scratches. Just curious the best way to get the mirror finish back?
03-05-2019, 09:26 PM
#5
Registered
iTrader: (7)
they are a rather dense felt pad. I use them all the time from polishing SS, chrome and even home made knives etc. Don't be afraid to wet sand bad areas with a fine paper. You can experiment on underside to see what you can get away with.
BTW I didn't get a link but I bought a few dozen on eBay. More than I'll in probably ten years. They hold up well.
Just do a quick search on eBay or google for 3" buffing pads.
You can also get them for 4" electric angle grinder.
BTW I didn't get a link but I bought a few dozen on eBay. More than I'll in probably ten years. They hold up well.
Just do a quick search on eBay or google for 3" buffing pads.
You can also get them for 4" electric angle grinder.
Last edited by getrdunn; 03-05-2019 at 09:37 PM.
