|
Originally Posted by IGetWet
(Post 4692871)
I asked him. He said it’s in there. He gets pressure, just not enough, like 15is instead of 30+psi.
I am at holiday now for 3 weeks and use merc pump. Get pressure at or over 30psi. Gauge work only to 30 but today i look at the ecomonitor that show real digitalletters. Michael |
Same diameter pulley on both pumps? |
On the older or Racing waterpumps you change only the rear impeller housing and front pump with pulley can be used in same way.
Michael |
|
I remember seeing this scrap metal on the bench and tossing it. Oem merc on the left and the Sierra on the right. A definite difference in thickness and quality. https://cimg9.ibsrv.net/gimg/www.off...30a7bcd15.jpeg https://cimg1.ibsrv.net/gimg/www.off...1a0b12ed0.jpeg |
When you put all of the parts in it actually pumps. Who woulda thunk it. Works great on the hose so far. |
You’re going to love that pump man. I have had mine since 2012 and it’s simple peace of mind. I love the slotted mounting hole. Makes the yearly impeller change so much easier. How many hours do you have on you new motor now? |
Originally Posted by ph1971
(Post 4693994)
You’re going to love that pump man. I have had mine since 2012 and it’s simple peace of mind. I love the slotted mounting hole. Makes the yearly impeller change so much easier. How many hours do you have on you new motor now? The water pump pump is working great now. I have a 160° thermostat and it held 170 all day. |
Originally Posted by Baja Rooster
(Post 4695118)
Finally got about two hours on her and she runs like a champ! The water pump pump is working great now. I have a 160° thermostat and it held 170 all day. Thanks Jason |
Originally Posted by resurrected
(Post 4695156)
Rooster - are you open or closed cooling system? I'm in the process of assembling mine and can't decide 160' or 180' thermostat to get hot enough for the sniper
Thanks Jason |
This scared me because I just ordered two of these and some fittings Glad you found your issue. Looking forward to getting them now!! |
Thank you.
I have two new ones sitting on the bench and was concerned as well! |
| All times are GMT -5. The time now is 12:28 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.