|
Originally Posted by 14 apache
(Post 4692773)
Do you have a caliper to measure the depth of the stainless housing?? Might be to long. https://cimg0.ibsrv.net/gimg/www.off...a4f7ec58e.jpeg https://cimg1.ibsrv.net/gimg/www.off...121135d35.jpeg |
https://cimg7.ibsrv.net/gimg/www.off...18847f22d.jpeg It looks like nearly an 1/8” gap. This is the oem Merc impeller. I got a Sierra one laying around and brand new measures even smaller. |
You have this wear plate in the back of the pump correct?
https://cimg3.ibsrv.net/gimg/www.off...f51ea4ed6.jpeg |
Originally Posted by IGetWet
(Post 4692827)
You have this wear plate in the back of the pump correct?
https://cimg3.ibsrv.net/gimg/www.off...f51ea4ed6.jpeg |
Originally Posted by IGetWet
(Post 4692827)
You have this wear plate in the back of the pump correct?
https://cimg3.ibsrv.net/gimg/www.off...f51ea4ed6.jpeg |
The Hardin email mentioned it, “inner wear plate”. I do have the same pump and thought as I was putting it together how the pump probably wouldn’t work at all if that small piece was missed.
|
I wonder if Brembo has the same problem? |
Originally Posted by IGetWet
(Post 4692856)
The Hardin email mentioned it, “inner wear plate”. I do have the same pump and thought as I was putting it together how the pump probably wouldn’t work at all if that small piece was missed.
|
Originally Posted by ph1971
(Post 4692861)
I wonder if Brembo has the same problem? |
On to another thing...whatcha all think about the machining on the inside? Seems like it would wear on the rubber a bit. |
| All times are GMT -5. The time now is 05:08 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.