Offshoreonly.com - Mercruiser Crank No Start With Code 41

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Mercruiser Crank No Start With Code 41 (https://www.offshoreonly.com/forums/general-q/361623-mercruiser-crank-no-start-code-41-a.html)

sutphen 30

07-04-2019 09:09 PM

try disconnecting the tach.might try bypassing the ignition switch by jacking 12v into the purple wire then try starting it.

nicktrover

07-05-2019 09:52 AM

The ignition switch was replaced and tests properly. I’ve tried everything with the tach disconnected as well as connected. There is no kill switch and the neutral safety switch tests properly....

Nick

Quote:

Originally Posted by sutphen 30 (Post 4695123)

try disconnecting the tach.might try bypassing the ignition switch by jacking 12v into the purple wire then try starting it.

BUP	07-06-2019 12:10 PM

have you tested for spark ?

Module
pick up coil
knock sensor

Sham	07-14-2022 07:11 PM

Having same problem

Nick please tell me how or if you solved this problem. Having the same issue and also pulling hair out!

All times are GMT -5. The time now is 09:42 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page