|
CMI headers and Sealant
Is it a no no to use sealant on the flange between header and tailpipe?? If its acceptable, RTV Red??
Thanks... new to the forum but have been stalking for a while!!! |
You can try to let it set before running. That's the only thing stellings uses. |
rope seal or compression thin gasket ??
|
Compression Thin gasket. V-clamp and T Bolt
|
Ive never used it on the v clamp
|
Re-assembing and 1 flange marries up perfect and 1 is a little off. T bolt was a bit rusty on that side so Im assuming it leaked alittle. Prior owner definitely used something on it from the looks of the gasket. Whats lesser of 2 evils, doubling gasket or Hi Temp red??
|
the tails have to be aligned perfectly inorder not to have a leak......Id use sealant and not 2 gaskests
|
Thanks Speedy
|
One thing might be going on if this is twin engine they could have two pipes or two headers switched. |
Originally Posted by Kryptonite
(Post 4699704)
Is it a no no to use sealant on the flange between header and tailpipe?? If its acceptable, RTV Red??
Thanks... new to the forum but have been stalking for a while!!!
Originally Posted by 14 apache
(Post 4699724)
One thing might be going on if this is twin engine they could have two pipes or two headers switched. |
| All times are GMT -5. The time now is 07:46 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.