Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   External add on line reversal symptoms? (https://www.offshoreonly.com/forums/general-q/363039-external-add-line-reversal-symptoms.html)

fastlane40 09-20-2019 11:35 PM

External add on line reversal symptoms?
 
External add on Saginaw giving me grief.
What would happen on trailer at idle if the lines were crossed at the valve?

fastlane40 09-21-2019 12:01 AM

Twin mayfair rams.
After running at idle for half an hour attempting to turn wheel back and forth i can only get full lock in 1 direction.
In the other direction it will only go straight.It also feels ratchety and jumpy.
I am able to turn drives easily when not running in both directions.
Reservoir is initially airated but then settles.
Any idea's?
I swapped lines at the valve.Seemed no different.

Crude Intentions 09-21-2019 12:29 AM

Sounds like air in the lines. I don’t know add on systems as I have full but on my full reversed lines actually made it very short lock to lock. 3/4 of a turn. I’m sure there’s other variations that would do different things. Also with full hydraulic I can’t budge my drives by pushing them. Not sure if this helps but hope so

fastlane40 09-21-2019 03:53 AM

Thanks for the reply.
Just sorted it.Some F#@%%$$g idiot had a transom hose on wrong.
I went to the race boat which i rigged full hydraulic and looking at the rams, realized i had put the outer transom lines on the same tee.
Swapped it around and all good.


All times are GMT -5. The time now is 09:26 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.