EFI kit basic.Whats available
 

Prefer a kit capable of 700hp without an oxygen sensor.In the past whenever i've used sensors they foul too
quick.
Anything available

That would eliminate self tuning, and make it more difficult to tune in general.

Its my understanding that the Holley system uses O2 sensors, but once tuned the sensors can be removed. ICDEDPL would know more

Most stand alone systems can run in open loop (no 02s).
What is your budget?

The whole point of EFI is Closed loop compensation using an 02 sensor. Otherwise what`s the point ?
find a way to make your 02 live. It`s not going to foul out with EFI , water is your only enemy

This may save the O2 sensor
Innovate motor sports 3729 heat sink bung extender hbx-1

Don't have a budget.
By fouling I meant moisture,might just have to go with O2 sensors.

So the Holley system?
I saw MSD make one.

https://www.offshoreonly.com/forums/...-everyone.html

you might find this link interesting,I did

You must have the O2 for tuning. Once done you can generally operate without.....BUT...I highly recommend keeping them active as is a great feedback tool on engine health. Key is having a well engineered sensor location.