Go Back  Offshoreonly.com > Technical > General Q & A
Exhaust tips 4" to 6"?? >

Exhaust tips 4" to 6"??

Like Tree2Likes
  • 2 Post By 30outlaw

Exhaust tips 4" to 6"??

Old 01-13-2020, 09:21 PM
  #1  
Platinum Member
Platinum Member
Thread Starter
 
Join Date: Sep 2010
Location: Northern Jersey
Posts: 818
Default Exhaust tips 4" to 6"??

Looking to change out my exhaust tips. I have 500 efi's with E-Tops and the Corsa tips, that have the built mufflers. Im guessing they are either 4 or 4.5" inside, and approx 6" or 6.5" on the outside. I personally like the look of the larger diameter. What I'm looking to do, is a slash cut with internal flapper, and same design... 4/4.5" inside and 6/6.5" outside. Im guessing Id have to get something custom made. Any ideas, suggestions? Has anyone else done this?
Got Cigs is offline  
Old 01-14-2020, 02:42 PM
  #2  
Platinum Member
Platinum Member
 
30outlaw's Avatar
 
Join Date: Jun 2008
Location: Fond du Lac, WI
Posts: 116
Default custom tips

Originally Posted by Got Cigs View Post
Looking to change out my exhaust tips. I have 500 efi's with E-Tops and the Corsa tips, that have the built mufflers. Im guessing they are either 4 or 4.5" inside, and approx 6" or 6.5" on the outside. I personally like the look of the larger diameter. What I'm looking to do, is a slash cut with internal flapper, and same design... 4/4.5" inside and 6/6.5" outside. Im guessing Id have to get something custom made. Any ideas, suggestions? Has anyone else done this?
had my local metal fab shop make tips for me, have 525's and was shipped from the factory with the corsa mufflers that were 6" on the outside. they were able to weld 4" inside and 6" outside on the flange and match the bolt pattern so zero fiberglass work. then bought the flappers from corsa and put them in myself. pictures are before and after polishing, not a big fan of polished/chrome so was going to stay with the raw stainless look but was really hard to keep clean so i broke down and had them polished...

I also contacted corsa for this project they were quite a bit more expensive, but if you don't have a local metal fab shop may be your only option




endeavor1 and Got Cigs like this.
30outlaw is offline  
Old 01-15-2020, 03:57 AM
  #3  
BUP
Registered
iTrader: (9)
 
Join Date: Jul 2011
Location: Ft. Worth TX
Posts: 9,310
Default

I have been doing the bolt on and the weld of these that I get made all SS.

BUP is offline  
Old 01-15-2020, 03:59 AM
  #4  
BUP
Registered
iTrader: (9)
 
Join Date: Jul 2011
Location: Ft. Worth TX
Posts: 9,310
Default

the bolt on of course is simple to do. 4 inch to 5 and 4 inch to 6

BUP is offline  
Old 01-15-2020, 04:00 AM
  #5  
BUP
Registered
iTrader: (9)
 
Join Date: Jul 2011
Location: Ft. Worth TX
Posts: 9,310
Default


BUP is offline  
Old 01-21-2020, 09:57 PM
  #6  
Platinum Member
Platinum Member
Thread Starter
 
Join Date: Sep 2010
Location: Northern Jersey
Posts: 818
Default

Thanks for the input guys, much appreciated. 30outlaw, sweet looking boat and set up btw.
Got Cigs is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


OSO Sponsor
OSO Advertiser
OSO Advertiser

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

OSO Advertiser