Go Back  Offshoreonly.com > Technical > General Q & A
496 exhaust pop >

496 exhaust pop

Notices

496 exhaust pop

Old 06-14-2020, 06:49 PM
  #1  
Registered
Thread Starter
 
Join Date: Feb 2020
Posts: 59
Received 2 Likes on 2 Posts
Default 496 exhaust pop

Seems to be on number 8. Was running great then just started popping in exhaust on right side at idle. Runs ruff. New plug wires and Had injectors cleaned. No change. Fuel pressure steady at 45psi running (for DANA exhaust) pulled head checked valve train (30hrs on head job from broken spring) inspected car pushrods and all is well. Engine seems to miss on Rt bank. Swapped crank position sensors. Still pops and intermittently stumbles. At my wits end. Don’t have a merc scanner. No codes on my Bluetooth smart craft
MikeSXT25 is offline  
Old 06-14-2020, 07:36 PM
  #2  
Registered
iTrader: (1)
 
Join Date: Nov 2009
Location: KY
Posts: 4,101
Received 471 Likes on 367 Posts
Default

Had injectors cleaned.
Did the injectors go back in the same cylinders?
Who cleaned and flow tested, have a test sheet?

AllDodge is offline  
Old 06-14-2020, 07:59 PM
  #3  
Registered
Thread Starter
 
Join Date: Feb 2020
Posts: 59
Received 2 Likes on 2 Posts
Default

Dr injector did them they are all within spec Now. Was way out. . No real change from before cleaning and after.
MikeSXT25 is offline  
Old 06-15-2020, 06:22 AM
  #4  
Registered
iTrader: (8)
 
Join Date: Nov 2006
Location: Tygart Lake, WV
Posts: 1,287
Received 119 Likes on 81 Posts
Default

Without a techmate/scantool you can compression test cyls to make sure engine is ok. Your FP sounds good. Need a techmate and someone who knows how to use it. You will be able to test coils and spark under load to pinpoint cyl giving u the problem.

What plugs/wires? Make sure you have real plugs and not china knockoffs with correct gap.
Ryan00TJ is offline  
Old 06-15-2020, 06:47 AM
  #5  
Registered
iTrader: (1)
 
Join Date: Nov 2009
Location: KY
Posts: 4,101
Received 471 Likes on 367 Posts
Default

Was way out. . No real change from before cleaning and after.
They were WAY out yet no change before or after, that doesn't sound right

Were the injectors reinstalled in their same cylinders?

Maybe move some around to see if it moves
AllDodge is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.