Originally Posted by Rookie (Post 4744575)

What Mallory pump are you running? I run Mallory 140's. I just went and looked at my Scarab and the pumps are mounted even with the top of the fuel tank. My loop does go down to about halfway down the tank.

Originally Posted by IHTFP (Post 4744776)

Here is what I am planning to avoid a suction problem from the high pressure pump.

https://cimg6.ibsrv.net/gimg/www.off...10807df224.jpg

Originally Posted by riverrunner242 (Post 4744789)

yeah I'm just running a carb so I dont have a high pressure pump and I dont have a mech pump provision on my block. Hopefully I need a high pressure pump on my new boat👍

Originally Posted by IHTFP (Post 4744776)

Here is what I am planning to avoid a suction problem from the high pressure pump.

https://cimg6.ibsrv.net/gimg/www.off...10807df224.jpg

Originally Posted by SB (Post 4745163)

You should start a new thread on that. I see some things that should be changed up.