|
Looks like 1/4-20 maybe 5/16. Haven’t used that paper in years. No on rocker cover bolt but good guess just not on those valve covers. What size is the head?
|
With the blue paint down the shaft, looks like an alternator bolt to me, that holds the two halves together
|
Bolt from the raw water pump?
|
Originally Posted by resurrected
(Post 4746861)
With the blue paint down the shaft, looks like an alternator bolt to me, that holds the two halves together
Not the type ) a 1994 ABC Merc but not HP500 I pulled apart this week-end though to redo the brushes. https://cimg9.ibsrv.net/gimg/www.off...9b42cf3206.jpg https://cimg2.ibsrv.net/gimg/www.off...363307ff6a.jpg |
Possibly mounting clamp bolt for the oil cooler?
Just throwing out there with the intermittent paint coverage down threads and coated bolt....??? |
Originally Posted by speicher lane
(Post 4746904)
Possibly mounting clamp bolt for the oil cooler?
Just throwing out there with the intermittent paint coverage down threads and coated bolt....??? At least something that needs ease of self centering the way it's canted/tapered on the end. Possibly threads into some type of clamp. Doubt oil cooler but maybe on right track. |
After seeing that alternator, I'm so glad I play in fresh water. That looks like it was used on salty roads in the winter
|
So, who has the closest guess ? I would guess the combo hex head with phillips would help alot, lol.
Originally Posted by resurrected
(Post 4746988)
After seeing that alternator, I'm so glad I play in fresh water. That looks like it was used on salty roads in the winter
|
Does the closest guess get a cookie?
I like cookies mmmmmmmmmmmmmm |
See ya Later has left the building
|
| All times are GMT -5. The time now is 01:52 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.