Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Hp500efi rebuild (https://www.offshoreonly.com/forums/general-q/367375-hp500efi-rebuild.html)

SABER28 07-11-2020 09:49 PM
Originally Posted by riverrunner242 (Post 4747511)
that's my plan I have a good guy that I worked with before and he is pushing me into a carb
i bought two core REAL bulldog shortblocks for 3k. tall deck bowties, lunati cranks, and manley rods. built two very mild 557 cid engines with all top quality parts. 1050 quick fuel carbs. run great, no loading up, start with one pump of the throttle every time.

articfriends 07-13-2020 06:45 AM
Originally Posted by F-2 Speedy (Post 4747431)
yes, full dressed with CMI sweepers, maybe we should of taken them off and do a pull, but we didnt
Were you there when they were dynoed, did you get to see the map/kpa readings at wot at all? when I tested them on a 540 w all out modded 500 intake it killed 20+ hp, wot map went from 98.5 to sub 95 with and without

F-2 Speedy 07-13-2020 07:40 AM
Originally Posted by articfriends (Post 4747910)
Were you there when they were dynoed, did you get to see the map/kpa readings at wot at all? when I tested them on a 540 w all out modded 500 intake it killed 20+ hp, wot map went from 98.5 to sub 95 with and without
I was there actually hooked them up on the dyno carts for Brad, hp and tq was all I was concerned with, his accident happened before I got the print outs. RIP


All times are GMT -5. The time now is 11:06 PM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.