what type of prop
#1
Thread Starter
Registered
Joined: Jul 2020
Posts: 16
Likes: 0
Hello new to boating just bought a 19ft cuddy cabin with a 350 mericruiser it has 21 pitch prop would like to know what some of you would run on it or if what I have is good thanks for any info
#2
Registered

Joined: Nov 2004
Posts: 14,100
Likes: 3,687
From: On A Dirt Floor
1.5 gears ? Probably but verify. What rpm is WOT and trimmed ?
If near 4800rpm, that is good and then If you are looking for better planing and lower on plane speed, I'd probably run a 19" 4 blade aluminum Solas or etc. They are like $120 shipped.
Edit in: this is assuming you are not trying to make this boat a hotrod ?
If near 4800rpm, that is good and then If you are looking for better planing and lower on plane speed, I'd probably run a 19" 4 blade aluminum Solas or etc. They are like $120 shipped.
Edit in: this is assuming you are not trying to make this boat a hotrod ?
#3
Thread Starter
Registered
Joined: Jul 2020
Posts: 16
Likes: 0
1.5 gears ? Probably but verify. What rpm is WOT and trimmed ?
If near 4800rpm, that is good and then If you are looking for better planing and lower on plane speed, I'd probably run a 19" 4 blade aluminum Solas or etc. They are like $120 shipped.
Edit in: this is assuming you are not trying to make this boat a hotrod ?
If near 4800rpm, that is good and then If you are looking for better planing and lower on plane speed, I'd probably run a 19" 4 blade aluminum Solas or etc. They are like $120 shipped.
Edit in: this is assuming you are not trying to make this boat a hotrod ?




