454 MPI rpm issue
#12
Thread Starter
Registered
Joined: Aug 2020
Posts: 35
Likes: 1
plug is ac Delco r42LTS. I’ll get the right ones and swap it thx. Will do compression test when I’m pulling them
#13
Registered

Joined: Nov 2004
Posts: 14,094
Likes: 3,684
From: On A Dirt Floor
I believe the L29 7.4’s take the LTS Delco’s, so, MR43LTS if the late Model L29. Also, NGK BPR6EFS that merc specifically lists.
#16
A 25 Outlaw with a 415hp 502mpi should run about 62-63 mph with a 23 Mirage Plus prop.
With the 7.4, you should still be running a 23 Mirage Plus but at around 4600rpm for prob 55-56 mph.
Are you possibly in a higher altitude area???
With the 7.4, you should still be running a 23 Mirage Plus but at around 4600rpm for prob 55-56 mph.
Are you possibly in a higher altitude area???
#18
Registered

Joined: Jul 2015
Posts: 1,201
Likes: 89
From: Atlantic Southeast
#20
Thread Starter
Registered
Joined: Aug 2020
Posts: 35
Likes: 1
I'm in dallas texas, so basically sea level. I found a couple bag plug wires and swapped them and was able to get her up to 49mph with 6 people in the boat this weekend. Im about to change the cap, rotor, wires and already have new plugs in it. Also going to service the fuel injectors. Think I'm pretty close to having her run right. Just those two wires and plugs made a huge difference! Before it felt very restricted, probably because 2 of the cylinders weren't getting proper spark. Now it feels smoother and planes much faster and less effort




