Offshoreonly.com

Go Back  Offshoreonly.com > Technical > General Q & A
Flange /yoke PTO? >

Flange /yoke PTO?

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

Flange /yoke PTO?

Thread Tools
 
Old 08-18-2020 | 07:12 AM
  #1  
open87
Thread Starter
Registered
20 Year Member
 
Joined: Feb 2003
Posts: 6,192
Likes: 318
From: Lafayette,La
Default Flange /yoke PTO?
The flange has 4 3/4”

yoke has 3 3/4”

not my area of knowledge...lol..



Driveshaft for extension box

Flange on Bam 1500
open87 is offline  
Reply
0
Old 08-19-2020 | 10:11 AM
  #2  
open87
Thread Starter
Registered
20 Year Member
 
Joined: Feb 2003
Posts: 6,192
Likes: 318
From: Lafayette,La
Default
Can't believe i'm the only one ever run into this ....lol....
open87 is offline  
Reply
0
Old 08-19-2020 | 10:26 AM
  #3  
TomZ's Avatar
TomZ
Platinum Member
25 Year Member
Platinum Member
 
Joined: Feb 2001
Posts: 4,295
Likes: 1,457
From: Virginia Beach
Default
Maybe contact BAM for a recommendation? Probably need to replace the yoke.
TomZ is offline  
Reply
2
Old 08-19-2020 | 11:33 AM
  #4  
Mbam's Avatar
Mbam
Offshoreonly Advertiser
25 Year Member
Offshoreonly Advertiser
 
Joined: Mar 2001
Posts: 2,517
Likes: 280
From: Pompano Beach FL, USA
Default
Your driveshaft is a 1350 series, the flange you have is 1480.
Yes you need a new flange. At one time Mercury also made an adapter to use small driveshaft with big flange.

You can replace the flange no problem.
__________________
Marc

www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Mbam is offline  
Reply
2
Old 08-19-2020 | 11:41 AM
  #5  
SB
Registered
20 Year Member
 
Joined: Nov 2004
Posts: 14,097
Likes: 3,686
From: On A Dirt Floor
Default
And that's a Bamm ! (pun intended)
SB is offline  
Reply
0
Old 08-19-2020 | 12:01 PM
  #6  
TomZ's Avatar
TomZ
Platinum Member
25 Year Member
Platinum Member
 
Joined: Feb 2001
Posts: 4,295
Likes: 1,457
From: Virginia Beach
Default
Originally Posted by TomZ
Maybe contact BAM for a recommendation? Probably need to replace the yoke.
Guess I had it backward.
TomZ is offline  
Reply
0
Old 08-19-2020 | 12:26 PM
  #7  
open87
Thread Starter
Registered
20 Year Member
 
Joined: Feb 2003
Posts: 6,192
Likes: 318
From: Lafayette,La
Default
Originally Posted by Mbam
Your driveshaft is a 1350 series, the flange you have is 1480.
Yes you need a new flange. At one time Mercury also made an adapter to use small driveshaft with big flange.

You can replace the flange no problem.

Ok , Thank y'all for the clarification .
open87 is offline  
Reply
0
Back to Subforum
General Q & A
View Next Unread
Internal exhaust flaps

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.