Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   8.3l Whipple vs. 10-71 (https://www.offshoreonly.com/forums/general-q/368724-8-3l-whipple-vs-10-71-a.html)

ICDEDPPL 05-14-2023 11:38 AM

hey Bob , sorry I didn`t get back to you on PM.

Only time when mine made a racket is when I had the timing at a certain degree while tuning .. it was as if it was almost rocking back and forth a bit and knocking. If I recall correctly the miming was higher that the usual 10-15* I run an idle, that being said they do knock a bit underload .
My buddy has 8.3s .. they were loud , he had em rebuilt and a new tune so not sure which one solved the issue.. his still knock a bit in gear at 1000 rpm but not bad .


I thought the long a$$ belt was going to make em noisy but seems okay, we`ll see under load .






bob 05-14-2023 01:13 PM

Dan I think mine need some TLC. Timing at 1000 is is 13 deg.. Big dif between yours and mine I am thinking. Thanks for the info.

Flatlinenj 09-27-2023 09:05 AM

ICDEDPPL- Holley EFI
 
[QUOTE=ICDEDPPL;4867666]hey Bob , sorry I didn`t get back to you on PM.

Good morning, are you running Holley EFI? I just swapped a 572 with the 8.3 whipple to the Holley HP ECU and harness and was looking for a little guidance. I run the HP on my procharged 540 but this is obviously different with 10 injectors and not multiport. Thanks!
Scott

ICDEDPPL 09-27-2023 09:22 AM

Ya I`m running a HP ECU
What do you need to know ?

Flatlinenj 09-27-2023 09:44 AM

Holley HP
 

Originally Posted by ICDEDPPL (Post 4881112)
Ya I`m running a HP ECU
What do you need to know ?

Im not 100 percent sure how to set it up for the 10 injectors. Right now it’s wired like the MEFI
Also not sure on a base tune. I put one together that should be fairly good but haven’t run it yet. I’ve seen others but I feel mine would be pig rich at first at idle

ICDEDPPL 09-27-2023 11:37 AM

Im not sure which harness you have , I modified one that I used with Terminator stealth throttle bodies. I ran the extra 2 injectors in parallel with the others, just spliced into the injector wiring .

I have my old V5 tunes if you want me to send it to you as a starting point .
Need your email .



ICDEDPPL 09-27-2023 11:42 AM

https://documents.holley.com/techlib...tions_rev3.pdf

last page applies to you

Flatlinenj 09-27-2023 11:47 AM

last page applies to you[/QUOTE]

This is wired pretty much the same. Awesome thank you
The V5 tune would be awesome.
maloney1215 at gmail

Flatlinenj 09-27-2023 11:52 AM


Originally Posted by ICDEDPPL (Post 4881135)
Im not sure which harness you have , I modified one that I used with Terminator stealth throttle bodies. I ran the extra 2 injectors in parallel with the others, just spliced into the injector wiring .

I have my old V5 tunes if you want me to send it to you as a starting point .
Need your email .

I have the harness that came with the whipple and tied it into the Holley MPFI harness

mail is maloney1215 at gmail

ICDEDPPL 09-27-2023 12:09 PM

Sent ...


All times are GMT -5. The time now is 01:48 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.