Imco powerflow PLUS manifolds, whos running them?
10-25-2020 | 01:32 AM
#11
Platinum Member
Joined: Jan 2007
Posts: 2,242
Likes: 264
From: Jackson, n.j. ~ Brooklyn, n.y.
I have 2 pair Imco PFP Manifolds & 30* risers installed last year on my 35' Cig 572 twin BB chevy's...........only 2 hours of running time since install............ This year we only ran engines on the hose since upholstery work delayed my summer.
The boat ran great last year after install.....The reason for new manifolds and risers?.... previous owner (in Florida) did not flush before storing boat away.....thus the old PFP manifolds were eaten up by the salt....on test run several holes blew
out and almost hydro-locked engines........I replaced the PFP Imco's & 30* risers that Flagship Marine (Punta Gorda, FL.) originally rigged with........Great engine builders, but terrible method for their long tern storage of boats.
The boat ran great last year after install.....The reason for new manifolds and risers?.... previous owner (in Florida) did not flush before storing boat away.....thus the old PFP manifolds were eaten up by the salt....on test run several holes blew
out and almost hydro-locked engines........I replaced the PFP Imco's & 30* risers that Flagship Marine (Punta Gorda, FL.) originally rigged with........Great engine builders, but terrible method for their long tern storage of boats.
10-25-2020 | 07:31 AM
#12
Registered
Joined: Oct 2010
Posts: 1,621
Likes: 402
From: Cheboygan, MI
10-25-2020 | 10:45 PM
#13
Thread Starter
Platinum Member
Joined: Jun 2004
Posts: 7,321
Likes: 1,039
From: frankenmuth michigan
I have 2 pair Imco PFP Manifolds & 30* risers installed last year on my 35' Cig 572 twin BB chevy's...........only 2 hours of running time since install............ This year we only ran engines on the hose since upholstery work delayed my summer.
The boat ran great last year after install.....The reason for new manifolds and risers?.... previous owner (in Florida) did not flush before storing boat away.....thus the old PFP manifolds were eaten up by the salt....on test run several holes blew
out and almost hydro-locked engines........I replaced the PFP Imco's & 30* risers that Flagship Marine (Punta Gorda, FL.) originally rigged with........Great engine builders, but terrible method for their long tern storage of boats.
The boat ran great last year after install.....The reason for new manifolds and risers?.... previous owner (in Florida) did not flush before storing boat away.....thus the old PFP manifolds were eaten up by the salt....on test run several holes blew
out and almost hydro-locked engines........I replaced the PFP Imco's & 30* risers that Flagship Marine (Punta Gorda, FL.) originally rigged with........Great engine builders, but terrible method for their long tern storage of boats.
