Fuel Pressure gauge installation
11-14-2002, 05:08 PM
#1
Registered
Thread Starter
Fuel Pressure gauge installation
Has anyone installed a gaffrig fuel pressure gauge on a 496HO? What parts are needed? Where did you tap into the system?
john
john
11-16-2002, 10:08 AM
#2
CBPBA's Walmart Greeter
VIP Member
John, might want to send a message to Andy Imhoff at Maryland Offshore Performance, he's installed a couple of those packages for Bruno and Gary, both members of the club. [email protected]
__________________
K2
-----------------------------------------
CHESAPEAKE BAY POWER BOAT ASSOCIATION
'http://www.cbpba.com'
"Experience is something you don't have until just after you need it."
K2
-----------------------------------------
CHESAPEAKE BAY POWER BOAT ASSOCIATION
'http://www.cbpba.com'
"Experience is something you don't have until just after you need it."
12-01-2002, 08:30 PM
#4
CBPBA's Walmart Greeter
VIP Member
John,
Andy recommended I install the same thing, hence the suggestion. Should be someone here who can answer the question. If not, he should be at the meeting on Tuesday night.
Andy recommended I install the same thing, hence the suggestion. Should be someone here who can answer the question. If not, he should be at the meeting on Tuesday night.
__________________
K2
-----------------------------------------
CHESAPEAKE BAY POWER BOAT ASSOCIATION
'http://www.cbpba.com'
"Experience is something you don't have until just after you need it."
K2
-----------------------------------------
CHESAPEAKE BAY POWER BOAT ASSOCIATION
'http://www.cbpba.com'
"Experience is something you don't have until just after you need it."
