Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Mechanical water pressure gauge (https://www.offshoreonly.com/forums/general-q/370331-mechanical-water-pressure-gauge.html)

AllDodge 02-10-2021 10:50 AM

If your using the 1/8 tubing then no need to drain for winterizing.

Scarab Viking 02-10-2021 03:52 PM


Originally Posted by AllDodge (Post 4776991)
If your using the 1/8 tubing then no need to drain for winterizing.

OK... How come?

underpsi68 02-10-2021 04:07 PM


Originally Posted by Scarab Viking (Post 4777015)
OK... How come?

I could see the water leak in the spring lol

AllDodge 02-10-2021 04:07 PM


Originally Posted by Scarab Viking (Post 4777015)
OK... How come?

There is not enough water in a 1/8 line to expand enough to damage the line or much of anything else. When things are drained some of the water also comes out, not all, but even if it was full there just isn't much there.

Note the 1/8 inch line is OD, the ID is even smaller

Scarab Viking 02-11-2021 12:52 AM


Originally Posted by AllDodge (Post 4777018)
There is not enough water in a 1/8 line to expand enough to damage the line or much of anything else. When things are drained some of the water also comes out, not all, but even if it was full there just isn't much there.

Note the 1/8 inch line is OD, the ID is even smaller

OK, thanks!


All times are GMT -5. The time now is 12:47 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.