Offshoreonly.com - Is this a good method to set timming?

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Is this a good method to set timming? (https://www.offshoreonly.com/forums/general-q/370693-good-method-set-timming.html)

SB	03-09-2021 10:54 AM

So, what is the common consensus for the OP - 32 or 34 degrees total ?

getrdunn

03-09-2021 11:36 AM

Quote:

Originally Posted by SB (Post 4780794)

So, what is the common consensus for the OP - 32 or 34 degrees total ?

I ran 34 deg for several years (hard). 9.5:1 with iron heads and never ever had an issue. Jetting was even slightly on the lean side and was with MR43t’s and stock TB ignition. Just a FYI.

For a cam just run the 741 or 731. What exhaust? I may have missed that...

TomZ	03-09-2021 11:57 AM

Quote:

Originally Posted by getrdunn (Post 4780801)

Heads matter too. It may be in his other build thread... haven't looked.

TomZ	03-09-2021 11:58 AM

And just to add... I got a real kick out of this thread! Thanks for the Tuesday lunchtime grins!

niteridder64

03-10-2021 09:25 PM

https://cimg7.ibsrv.net/gimg/www.off...b2f09e8eea.jpg
https://cimg9.ibsrv.net/gimg/www.off...fa0310b5b3.jpg
CMI and the heads are stock EQ's

All times are GMT -5. The time now is 01:46 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page