Newb here, looking to turn a 502 into a 540, have questions
#21
Registered
iTrader: (1)
I don’t know what your budget is, but I would absolutely build a 540 if you can. It will do everything easier and allow you to build in the safe zone everywhere. I did it with a Dart block and heads HP 500 cam Eagle bottom end, Mahle flat tops 9:1, 1050 on a dart single plane. Even leaving power on the table at every turn, it makes 625 @ 5400. 150* water temps and 230* oil at wide open for a week. You won’t be sorry.
The following users liked this post:
GPM (03-31-2021)
The following 4 users liked this post by getrdunn:
#23
Registered
#25
Registered
iTrader: (1)
Last edited by SB; 04-01-2021 at 12:27 PM.
The following users liked this post:
SB (04-01-2021)
The following 2 users liked this post by ph1971:
getrdunn (04-02-2021), Gimme Fuel (04-02-2021)