|
Fuel Pump
What fuel pump are you guys using for MPI 43PSI, 60lb injectors, about 650 HP. Found a lot of options out there but not many marine USCG rated. Don't want to overkill it with a high current model.
|
Originally Posted by jeffswav
(Post 4788377)
What fuel pump are you guys using for MPI 43PSI, 60lb injectors, about 650 HP. Found a lot of options out there but not many marine USCG rated. Don't want to overkill it with a high current model.
https://www.aemelectronics.com/produ...flow-fuel-pump |
Originally Posted by Rookie
(Post 4788387)
https://www.cpperformance.com/p-1008...fuel-pump.aspx
https://www.aemelectronics.com/produ...flow-fuel-pump |
Originally Posted by jeffswav
(Post 4788389)
Are you using this one? I was actually debating on this same model.
|
I have always used Weldon 1100-A. Not sure if they are USCG approved, but they sure work well.
|
I run Aeromotive A-1000 marine pump
|
Originally Posted by Rookie
(Post 4788387)
https://www.cpperformance.com/p-1008...fuel-pump.aspx
https://www.aemelectronics.com/produ...flow-fuel-pump |
Originally Posted by Rookie
(Post 4788392)
Yes, I bought 2 for my Holley EFI project. I just dyno'd the other weekend. At full load 584 HP maybe 1PSI variance.
|
Originally Posted by ThisIsLivin
(Post 4788429)
What's the lift on this pump? I wouldn't want to mount it to low in the bilge.
Originally Posted by jeffswav
(Post 4788441)
Pretty sure I am going with this pump. Going to run -10 AN in and -8 AN out to the filter. What did you use for mounting?
https://www.ebay.com/itm/15407628807...Cclp%3A2334524 |
|
| All times are GMT -5. The time now is 01:44 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.