Does anyone have an image of the diagram they could send me in the meantime (Serial #0M950124)? With the computers out and all keys off I have a power to the red/blk wire to the3 pin connector that supply's the Smartcraft 10pin connector. Also, I under normal operation I believe that's a 5v wire and yet I'm reading full battery voltage. The other in the same state reads 0V. I'm trying to find out where that wire goes so I can see if its shorted, if it has failed diode inline or something is connected wrong. FYI, I ordered the 525 Diagnostic and Service manuals and they sent me the wrong set. I believe they're sending the correct ones however they're a week or more out and Memorial Day is getting close. Thank in advance for any help with this!