Offshoreonly.com - Engine hatch actuator (acculift)

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Engine hatch actuator (acculift) (https://www.offshoreonly.com/forums/general-q/372017-engine-hatch-actuator-acculift.html)

ThisIsLivin

06-14-2021 11:58 AM

It appears they got bought out. When I took my lift in they only had the shop in Melvindale. They rebuilt it in a couple of days and it's worked perfect since. I don't have a relay on mine, it runs straight off the switch. But the switch is rated at 20A. If you're seeing only 8.5V you have more than a lift problem.

BillK

06-14-2021 01:03 PM

Quote:

Originally Posted by scooby94 (Post 4793465)

I can take the motor off. I checked voltage with it lifting and had a heavy draw, down to 8.5v.

If this is correct then you need to correct the feed problem first. It should not be dropping that low. I would go through all of the wiring and grounds and make sure they are clean and tight. Have you tried it with the engine(s) running ?

All times are GMT -5. The time now is 06:09 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page