1998 502 Mag Wont Start
03-22-2022 | 07:54 PM
#41
Thread Starter
Registered
Joined: Mar 2022
Posts: 18
Likes: 5
From: Houston
03-22-2022 | 08:32 PM
#42
Thread Starter
Registered
Joined: Mar 2022
Posts: 18
Likes: 5
From: Houston
I've got a pump from a 98 Cool Fuel setup. It's used but was working well when pulled (I built new engines - carbureted). 400 hours per the ECM, but some of that could have been key-on-only time. You can have it for $50 plus the ride (I'm in VA). I'll throw in the regulator too (green stripe).
I also have a great set of better-than-OEM injectors that have maybe 20 hours on them if you're interested.
I also have a great set of better-than-OEM injectors that have maybe 20 hours on them if you're interested.
03-25-2022 | 05:06 PM
#45
Registered
Joined: Nov 2004
Posts: 14,152
Likes: 3,712
From: On A Dirt Floor
Be cool if we had figured out who made the pump. Walbro has a few thst look similar to it….so maybe…they have one somewhere…lol
edit in: looks like walbro and carter have a few that look kinda similar by pics
edit in: looks like walbro and carter have a few that look kinda similar by pics
Last edited by SB; 03-25-2022 at 05:20 PM.
03-25-2022 | 05:25 PM
#46
Platinum Member
Joined: May 2012
Posts: 11,438
Likes: 3,968
From: Midwest & T-Rock
03-25-2022 | 05:33 PM
#47
Platinum Member
Joined: Feb 2001
Posts: 4,303
Likes: 1,459
From: Virginia Beach
This is the correct one from Basic Power:
https://bpi.ebasicpower.com/shop/all...ssure-861156a1
I would trust it from them.
https://bpi.ebasicpower.com/shop/all...ssure-861156a1
I would trust it from them.
03-25-2022 | 05:59 PM
#49
Thread Starter
Registered
Joined: Mar 2022
Posts: 18
Likes: 5
From: Houston
Ive got the pump and regulator ordered. I ordered the pump Tom suggested. I will report back once I get them installed. It will probably be a bit as I will be out of town next week. Thanks again for all the help everyone!
