Gauges dont work after whipple programing
#1
Gauges dont work after whipple programing
I have a 2007 Fountain Express Cruiser with smartcraft. Just installed freshly built 496 with whipple superchargers.
My problem is my gauges, Tachomator, oil pressue, water temp and oil temp dont work. My smartcraft computer that displays all the same information as my gauges works fine. Whipple says they program only in analog,
Anyone else have this problem after whipple programming? How do I fix this? Do I have to run wiring to bypass my smartcraft system? Change gauges?
I would appreciate any help on this.
Thank you in advance for any and all help.
My problem is my gauges, Tachomator, oil pressue, water temp and oil temp dont work. My smartcraft computer that displays all the same information as my gauges works fine. Whipple says they program only in analog,
Anyone else have this problem after whipple programming? How do I fix this? Do I have to run wiring to bypass my smartcraft system? Change gauges?
I would appreciate any help on this.
Thank you in advance for any and all help.
#2
Platinum Member
Platinum Member
If you have AGI boxes check the connections,
#3
Registered
No problems with my analog gauges after installing Whipple kit on 2004 496HO. This stays true after a few trips of the PCM back to Whipple to tweak the tune too.
#4
#5
Registered
I have the vesselview mobile on it, not the actual smartcraft screen on the dash.