Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Harmonic Balancer (https://www.offshoreonly.com/forums/general-q/376705-harmonic-balancer.html)

PQ290Enticer 11-20-2024 02:23 PM
Originally Posted by TomZ (Post 4915005)
OEM is fine for what you're doing. A Pioneer balancer (externally balanced) and some timing tape for an 8-inch wheel will be more than adequate (paint over the timing tape with a clear nail polish... will last a long time). For a little more, Professional Products has them degreed already and can be setup for internal or external balancing (but they're chinesium).

https://www.summitracing.com/search/...nic%20balancer

I'd be a little worried about that rust though... what's up with that? Any water in the engine?
Hey Tom those are the original balancers from the old engines and I don't remember if there was rust on them when I took them apart. I think the new builds are clean? Didn't really notice anything and I've had the valve covers off a couple of different times. I ended up buying new balancers from scat. I think I bought the wrong seals though.
https://cimg3.ibsrv.net/gimg/www.off...7b1b9dbee9.jpg
https://cimg4.ibsrv.net/gimg/www.off...a76ce9d85f.jpg


All times are GMT -5. The time now is 04:50 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.