|
Cyl 3 spark plug came appart.
Cruising at 3500rpm and boom. Turned the key off and the engine was still trying to run. Bbc 509cid.
https://cimg6.ibsrv.net/gimg/www.off...67c2e90db4.jpg https://cimg7.ibsrv.net/gimg/www.off...2ac1785f78.jpg https://cimg9.ibsrv.net/gimg/www.off...378351bca1.jpg https://cimg2.ibsrv.net/gimg/www.off...a60a878786.jpg |
check your timing, had same issue happen to me......preignition that i couldn't hear
in my case my distributor loosened and one tight wire pulled it counterclockwise best . |
The plug boot has seen better days, might have been arching a bunch
As clean as the ground side electrode is it looks like it was running lean. Might want to use a bore scope and check the piston |
Originally Posted by AllDodge
(Post 4846080)
The plug boot has seen better days, might have been arching a bunch
As clean as the ground side electrode is it looks like it was running lean. Might want to use a bore scope and check the piston |
Originally Posted by SammyJ
(Post 4846079)
check your timing, had same issue happen to me......preignition that i couldn't hear
in my case my distributor loosened and one tight wire pulled it counterclockwise best . |
Plugs blowing out like that does happen more than you think. I've had it happen once years ago
|
Originally Posted by Griff
(Post 4846109)
Plugs blowing out like that does happen more than you think. I've had it happen once years ago
|
What delco plug # you using ?
|
Originally Posted by SB
(Post 4846122)
What delco plug # you using ?
|
Ok, the cyl 3 has 10bar compression, wich is 3bar less compared to other cylinders (13bar). Made leakdown test that measured 90%(cold engine) and got more confused, pressure seems to go in intake manifold, exhaust manifold and crakcase. Conclusion is that intake/exhaust valves are leaking, not sure about the piston rings because the large ring end caps and piston to wall clearance, due 2680 forged pistons. Took some pictures of the exhaust ports/valves/spark plugs. Removed the cmi sound eliminator mufflers, wonder if the mufflers caused reversion and caused all this. Other one of those mufflers feels tight compared to the other one. Dont know 🤥🤥
https://cimg7.ibsrv.net/gimg/www.off...c880c74146.jpg Cyl 3 https://cimg0.ibsrv.net/gimg/www.off...1dd456581d.jpg Others https://cimg4.ibsrv.net/gimg/www.off...2ba4620156.jpg https://cimg5.ibsrv.net/gimg/www.off...fb12451f5d.jpg https://cimg7.ibsrv.net/gimg/www.off...e67cc57873.jpg https://cimg8.ibsrv.net/gimg/www.off...1129eb9b54.jpg https://cimg9.ibsrv.net/gimg/www.off...a8b349494f.jpg https://cimg0.ibsrv.net/gimg/www.off...05369ee0ce.jpg https://cimg1.ibsrv.net/gimg/www.off...23dfcae57b.jpg https://cimg2.ibsrv.net/gimg/www.off...18291ea95c.jpg https://cimg5.ibsrv.net/gimg/www.off...53e4c4e2b6.jpg |
| All times are GMT -5. The time now is 08:03 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.