Controls
09-26-2022 | 07:38 PM
#1
Thread Starter
Registered
Joined: Jan 2016
Posts: 211
Likes: 10
From: Hudson Valley New York
Controls
I'm looking to replace my current (single) side mounted, Merc. controller, with a dual lever side control that Teague made for me. I'm in the New York area (Long Island/Connecticut) area. I know most shops are winterizing/shrink wrapping now. I will need new cables and it may need some interior work (upolstery) small amount. Does anyone know of a "good shop" in this area that could do this type of work? It's for a 23' Formula single 8.2 motor
Last edited by Wharf Rat 1; 09-26-2022 at 07:50 PM.
09-27-2022 | 01:41 PM
#2
Platinum Member
Joined: Jul 2013
Posts: 833
Likes: 639
From: Paducah,Ky
I'm looking to replace my current (single) side mounted, Merc. controller, with a dual lever side control that Teague made for me. I'm in the New York area (Long Island/Connecticut) area. I know most shops are winterizing/shrink wrapping now. I will need new cables and it may need some interior work (upolstery) small amount. Does anyone know of a "good shop" in this area that could do this type of work? It's for a 23' Formula single 8.2 motor
Saris Performance
4936 Lake Shore Drive
Bolton Landing, NY 12814
518-644-3080
