Rusty engine coupler - repair or replace?
#11
Charter Member #1171
Charter Member
Lets see a close up of the splines
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
The following users liked this post:
SB (10-07-2022)
#12
Registered
The surface rust when cleaned up and painted, should not be an issue.
As mentioned, how are the splines and rubber bushing?
How often do they fail at your HP/boat weight level?
Is the rubber still supple? Or all cracked?
What is the 'quality' of a new one? Made offshore?
I'm all for reliability. I run a single engine. But you have to be reasonable.
As mentioned, how are the splines and rubber bushing?
How often do they fail at your HP/boat weight level?
Is the rubber still supple? Or all cracked?
What is the 'quality' of a new one? Made offshore?
I'm all for reliability. I run a single engine. But you have to be reasonable.
The following users liked this post:
j272 (10-11-2022)