Offshoreonly.com

Page 4 of 4

« First

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Pistons (https://www.offshoreonly.com/forums/general-q/377334-pistons.html)

articfriends

10-20-2022 07:02 PM

Quote:

Originally Posted by Seanyb82 (Post 4848850)

ok, not easy to get milling work done like that where I am. Would 4 gram heavier piston make a whole lot of difference? Wiseco said it would be fine but not sure

You could easily touch inside of wrist pin end with a die grinder with carbide burr and keep checking it on a scale until you hit your goal weight, prob take a couple minutes so you don't agonize over it, Smitty

tripps

10-27-2022 07:08 PM

Pistion

I weighed a dollar bill it weighs 1 gram,u would not even notice it,5 gram difference,find another pistion I have a few sets what do u exactly need

Seanyb82

11-02-2022 03:47 PM

Quote:

Originally Posted by articfriends (Post 4848834)

If your removing 4 grams from pistons, take it out of the wrist pins. 4 grams is a alot of aluminum !

got the new piston with a heavier pin, only one close to match the weight but came in at 3 grams lighter than the original piston and pin, is this an acceptable weight difference?

BillK

11-02-2022 08:26 PM

Quote:

Originally Posted by Seanyb82 (Post 4850348)

got the new piston with a heavier pin, only one close to match the weight but came in at 3 grams lighter than the original piston and pin, is this an acceptable weight difference?

That wont hurt a thing. Stop worrying and tun it.

All times are GMT -5. The time now is 03:43 AM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page