OT-hp estimation
#1
Registered
Thread Starter
Join Date: May 2002
Location: istanbul
Posts: 1,580
Likes: 0
Received 0 Likes
on
0 Posts
OT-hp estimation
just planning to build a 454
11:1 cr
around 600 lift mech cam
oval port heads (99%)
tunnelram with twin 400'
do you think can generate smthng like 450?
11:1 cr
around 600 lift mech cam
oval port heads (99%)
tunnelram with twin 400'
do you think can generate smthng like 450?
#3
Registered
Thread Starter
Join Date: May 2002
Location: istanbul
Posts: 1,580
Likes: 0
Received 0 Likes
on
0 Posts
lol sonic;
but these gm oval ports are reaily bad heads.i dont have flow bench and etc.so the head work i do is very amatuer stuff.
will put this on a car and dont want to spend $ 's for heads etc..will just use whatever i find.....
but these gm oval ports are reaily bad heads.i dont have flow bench and etc.so the head work i do is very amatuer stuff.
will put this on a car and dont want to spend $ 's for heads etc..will just use whatever i find.....