|
Hex heads i use the head of a hex bolt :) just use 2 nuts on its threads to lockem so you can turn the bolt. :)
If allens, and the strip, alot of times a torx bit will takem out. |
you can tap a 12 point socket on a hex head and break it loose, had to do it on stock Merc head bolt
|
Originally Posted by SB
(Post 4863430)
Hex heads i use the head of a hex bolt :) just use 2 nuts on its threads to lockem so you can turn the bolt. :)
If allens, and the strip, alot of times a torx bit will takem out. https://cimg6.ibsrv.net/gimg/www.off...f8bac53f96.jpg |
| All times are GMT -5. The time now is 10:20 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.