L29 MPI Gen VI low oil pressure
08-14-2023, 05:15 PM
#11
VIP Member
VIP Member
$150 is a steal.
__________________
Baja 252 Islander
Baja 252 Islander
08-14-2023, 06:38 PM
#12
Registered
Thread Starter
The following users liked this post:
articfriends (08-14-2023)
08-26-2023, 11:09 PM
#13
Registered
Thread Starter
Did the big ferry to Port Angeles day. Got both blocks.
08-27-2023, 12:06 AM
#14
Registered
Thread Starter
Dude had it covered but some water got in the open valley.
#1 Main looks good.
Have to see where the low oil pressure was coming from.
L29 but the guide plates have HI PERF stamped on them.
Cast crank.
#1 Main looks good.
Have to see where the low oil pressure was coming from.
L29 but the guide plates have HI PERF stamped on them.Cast crank.
08-27-2023, 01:18 AM
#15
Registered
Thread Starter
Best part was my 12 yr old Daughter tearing it down.
The following users liked this post:
Xcomunic8d (08-27-2023)
09-05-2023, 09:18 PM
#16
Registered
Thread Starter
Some core shift.
Looks like the core shift would make the bores thicker on the thrust side.
I'll have to sonic test. Only planning 0.30" over to 4.280"
