Camshaft for Gen7 BBC...
#11
Registered
#13
Registered
Thread Starter
#14
Registered
Thread Starter
Yeah and some fuzzy math is telling me this xm296hr grind has 75 degrees of overlap. I will use this cam in my kids pickup truck. Should impress his buddies at school. lol
The 496HO seems to make the most sense. At least with the 1.8 rockers it will breathe a little better.
The 496HO seems to make the most sense. At least with the 1.8 rockers it will breathe a little better.
#15
Registered
iTrader: (1)
Can h pipe it to help fend off a little of the reversion tendencys.
And side exit exhaust usually has greater rate of fall then typical thru transom i believe
And side exit exhaust usually has greater rate of fall then typical thru transom i believe
Last edited by SB; 10-23-2023 at 01:41 PM.
The following users liked this post:
Dragracer_Art (10-23-2023)
#16
Registered
Thread Starter
My subscription expired so I cant upload pics anymore. lol
#19
Registered
My Nordic has a similar side exit exhaust to yours. I'm running a Whipple with the Raylar 800HP package. That's a big cam and I haven't had any evidence of reversion even with the factory exhaust. Oil samples have come back clean of moisture too.
The following users liked this post:
Dragracer_Art (10-24-2023)
#20
Registered
Thread Starter
I think I will get it running on a test stand first and try to simulate conditions with clear exhaust tubing to observe what happens.
The following 2 users liked this post by Dragracer_Art:
87MirageIntruder (10-24-2023), cheech (10-24-2023)