Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   2001 VOLVO DPX500 Flywheel / Starter (https://www.offshoreonly.com/forums/general-q/381817-2001-volvo-dpx500-flywheel-starter.html)

Mickeyfun 03-04-2024 08:37 PM

2001 VOLVO DPX500 Flywheel / Starter
 
Does anyone know the number of teeth on the flywheel for the 2001 VOLVO DPX500 8.2L. I am wanting to replace the starter with a High torque starter since mine is dragging and barely cranks. it has been that way since new ( I only have 89 hrs on the engines).

Bondo 03-05-2024 03:29 AM

Ayuh,....... Pull the starter, 'n look at the bolt pattern,......
Straight across is a 12" flywheel, 153 tooth,.....
The staggered pattern is the 14", 168 tooth,....

Mickeyfun 03-05-2024 08:06 PM

Thanks a million, I have The staggered pattern starter :cool-smiley-026: Now I need to go find a starter.

BillK 03-06-2024 06:14 AM

Before you waste money on a starter make certain that all of the power and ground cables are clean and secure.

Bondo 03-06-2024 07:46 AM

Ayuh,..... My advice is to go with a pmm style starter,..... 1/2 the weight, 'n twice the power of the ole style starters,....

Mickeyfun 03-06-2024 11:52 AM

I already done that, New 800 CCA battery tested, and clean connections Positives and Negatives on battery side and engine side, also timing has been moved a few degrees retarded and advanced.

Mickeyfun 03-06-2024 12:04 PM


Originally Posted by Bondo (Post 4892458)
Ayuh,..... My advice is to go with a pmm style starter,..... 1/2 the weight, 'n twice the power of the ole style starters,....

What is "PMM" ? I looked for a Marine Mini starter with gear reduction but could not find one under $400.00 , I like the PowerMaster brand but they don't have Marine Starters,, I ordered ARCO Part #30470-ANEW OEM Quality Hi Torque, Permanent Magnet, Gear Reduction Starter. 1.7 KW for a couple hundreds and hopefully it will work otherwise I will have to step up the expense.

Bondo 03-07-2024 04:55 AM

Ayuh,.... Permanent Magnet Motor,....

Mickeyfun 03-08-2024 11:43 PM


Originally Posted by Bondo (Post 4892458)
Ayuh,..... My advice is to go with a pmm style starter,..... 1/2 the weight, 'n twice the power of the ole style starters,....


Originally Posted by Bondo (Post 4892550)
Ayuh,.... Permanent Magnet Motor,....

Thanks :D

Mickeyfun 03-08-2024 11:50 PM

Installed the new starter motor and to my surprise, cranked pretty good. but no start and after a bit of diagnostic found deffective Hi flow fuel pump. just ordered one.


All times are GMT -5. The time now is 09:45 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.