Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Needing Stringer Repair/Rebuild Referrals (https://www.offshoreonly.com/forums/general-q/387780-needing-stringer-repair-rebuild-referrals.html)

bmarinaccio 04-10-2026 10:12 AM

Needing Stringer Repair/Rebuild Referrals
 
I have a 28' Velocity with significant termite damage to the entire stringer system... needing referrals for well qualified and experienced person or shop in the southeastern US who can rebuild the stringers, and install a new tank and flooring. The boat was tented right after the termite discovery. All of the stringers have various levels of core destruction and likely need complete replacement... the transom was replaced with Coosa several years ago and is solid. Most of the boat has been gutted down to the stringers and sits inside my garage. Located in the Northwest Florida Panhandle... no problem trailering the boat within a 500 to 600 mile radius.

Happy to provide any additional information.

Thanks in advance!!
Brett

Wildman_grafix 04-10-2026 10:58 AM

I think Velocity is doing some rebuilds, not sure. Might want to check with them. Sanford is not that far from you, across on 10 down 95.

bmarinaccio 04-10-2026 11:04 AM

Thanks... been trading messages with them for over a year and they've just too busy with new builds to take on a project like this. Unfortunate as that was by far my first choice but I'm sure there are others with the knowledge and ability.

Padraig 04-10-2026 11:55 AM

Check with Kenny at Let's Talk Boats. I know he does some repairs and refurbishing. Kenny used to be the GM at Velocity. If I remember correctly...He is in Deland

Padraig

Wildman_grafix 04-10-2026 01:46 PM


Originally Posted by Padraig (Post 4945774)
Check with Kenny at Let's Talk Boats. I know he does some repairs and refurbishing. Kenny used to be the GM at Velocity. If I remember correctly...He is in Deland

Padraig

Yes you are correct on both Padraig. He is working out of Bruces old place.

https://cimg9.ibsrv.net/gimg/www.off...017836004.jpeg

Padraig 04-10-2026 03:52 PM

Good pic! Haven't talked with him for a while. Knowledgeable guy and a straight shooter

Padraig

compedgemarine 04-10-2026 04:40 PM

I have a guy here in Dawsonville Georgia that does all my stuff. really good so if that is not too far I will send you his number


All times are GMT -5. The time now is 08:10 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.