![]() |
Back4more,
All I would need are the EMPTY cases and the -2" vertical shafts. I'm 90% sure I have a line on a pair right now, but I will definately consider yours if the my deal doesn't work out. Thanks. |
OK...These have the 1.34 gears and the 1 1/4" propshafts.
|
In regards to the loss of using the stock mechanical spedo. I plugged the hole at the bottom of the spedo pick up passage and drilled the speedo hole into the front of the drive and it works fine.
|
Tinkerboater. where is the passage located? Is it in the low water pickup. What did you plug it with and where did you drill the hole. I have the IMCO shorty and xr upper so the passage isn't used.
|
Re: IMCO Extreme SC drive....
Hi I need guidance on driving and not breaking a Imco Extreme SC drive.......what are the can handle and can not handles ?
The boat is a 25 Talon with a blown 557......aprox 950 hp . Thank you . Larry |
Re: IMCO Extreme SC drive....
950hp?????
Its just a question of when it will explode????? I would keep a spare handy. |
Re: IMCO Extreme SC drive....
Originally Posted by GETTINBYE
IMCO,
Any experience with a version of your shorter drive on a Baja, 36 Outlaw? If so how much shorter 1" or 2" & what were the results? Thanks, Mark I have a buddy that put the 2 inch shorties on some Whippled 509's running 94 MPH and they did very well. Another guy put them on a stock boat and he could not get it on plane. For some reason I cannot explain they do not work well on the 36 with stock power. If you put the extension boxes on it will help them to work better. |
Re: IMCO Extreme SC drive....
Originally Posted by Dock Holiday
If you go to the Baja section you will find some information on this.
I have a buddy that put the 2 inch shorties on some Whippled 509's running 94 MPH and they did very well. Another guy put them on a stock boat and he could not get it on plane. For some reason I cannot explain they do not work well on the 36 with stock power. If you put the extension boxes on it will help them to work better. He didn't have a bunch of hrs on the drives b4 he sold it. So the verdict is still out. I do have a buddy that has a 620 ci in 830 hp 25 eliminator with a 250 shot of NOS on it and it lasted pretty long. But it wasn't a blower motor. 950 blower hp is a ton on a drive. So my opinion it's just a matter of time. I would go and get the 4X4 if I had that can of power :( |
Re: IMCO Extreme SC drive....
I'm currently running a Bravo XR with 1.36 gears on my 25 Outlaw. I've got a line on a used, less than 15 hours, Imco Extreme outdrive with the same ratio. Any opinions on what each is worth? Anyone interested in the Bravo XR?
Mike |
Re: IMCO Extreme SC drive....
Originally Posted by MikeBaja232
I'm currently running a Bravo XR with 1.36 gears on my 25 Outlaw. I've got a line on a used, less than 15 hours, Imco Extreme outdrive with the same ratio. Any opinions on what each is worth? Anyone interested in the Bravo XR?
Mike Is it a Imco Extreme or a Imco Extreme SC big difference not much if any between an XR and a Imco extreme what blade are you swingin |
| All times are GMT -5. The time now is 02:47 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.