any tips or tricks to get this stuff off one place i went to told me to burn it off that just doesnt seem right
help?

take it to a GOOD sand blaster. If they know how to take if off they will be able to do it NO problem. I had mine done that way, and that was after I tried to sand blast it myself for a couple hours and got no were. They did the blasting and repowdercoated them for I think it was 180 bucks. TIME IS MONEY

Jon

You can strip them with Mar-hyde Tal strip air craft stripper. Use a (respirator). It was about an 5 beer job but they look nice now!

LETS SEE IF I read this right? Your wife did the work, she got one beer and you had five out of the six beers it looks great cheers!!!!!!!!!!!

I had a billet gas cap with the purple "fusion coat" powder coating starting to chip. I let it soak in a can of carb cleaner for a while and it wiped right off. If I recall I think it loosened up in about 30 minuted but it took longer to get everything out of the corners, etc.

The cleaner to use is the "dip type" that comes in a one gallon paint can. Should be able to get it at any auto parts store. I think you can also get it in 5 gallon size for larger items, but not sure where.

Once it's done it looks perfect!!

Good Luck!

Jeff

Yep.
Powder is just a plastic. Anything that will dissolve or soften plastic will work on powder. Heat. Airplane stripper. Solvent.

Jeff, never seen a DOG tree before. DogWOOD yes, DOG no.

Lotus AND dog tree.

Life is good...

used some stuff from home depot called jesco worked great going to take it the blaster just clean it up good thanks for the replys
bo

Mike -

Dogwood - Very good!!!

Our dog was lovin' the snow. He was jumping to catch a frisbee and we caught him in the act! It was a cool pic so I thought why not be my avitar for a while.

The cleanest, fastest way to remove powder coat is PVC Primer. Just dab it on and wipe it off in a few seconds. Just did several parts today, took less than 5 mins.

Pantera 24 are you kidding me?Like pvc pipe primer?