Lake Norman TRS rebuild?
 

I am just about to pull my drive off -- and want to get it rebuilt.

Can anyone recommend someone near the charlotte area?


on another note -- I also want to have my mercII tranny gone through and beefed up to handle 600hp -- is that doable -- and is there someone once again in the Charlotte area that can do that?


The project has finally begun!! I stripped the interior last nite and am working on the exterior -- will hopefully pull the motor and drive in the next week or two! (this is a 24 pantera)


thanks for any advice/help

Mark

Mark, I took my drive to the US Air Cargo Terminal and sent it to Doller Offshore in Ft lauderdale it was about 90 dollars shipping one way. I had it back in 5 days . Talk to mac at 1-800-376-1616. I have also talked to Bam marine at 954-321-0606 and I might let them do my next rebuild. Its just a matter of time when you have high horsepower /torque running through a Trs. Bam was talking about manufacturing an adapter to mount a lower bravo to a trs upper. I would let the people who do drives everyday do my drive and thats not anybody in charlotte, especially a trs drive. Harry

cool -- thanks for the info


were you happy with the quality?

ok -- I talked to Mac -- sounds like a nice guy -- and a quick turn around.

when you shipped yours via US air -- did you crate it?

Rebuild
 

Guys, There is only one person that is near Charlotte that can or will ever get the chance to work on my boat , and his name is Michael Morgan and the name of his company is Marine Machine located in Cornelius. He is very good at almost anything to do with a boat, including rigging , outdrives, etc. He has done a lot of work for me in the past and comes highly recommended. His number is 704-742-5369 or 704-483-4514

I'll give him a call and see what he say's

mpejsa, I boxed my drive up using alot of Cardboard, Doller sends it back in a outdrive box. Motor freight might be cheaper if you are not in a hurry. Steet recomendations I would trust but there are not very mini trs drives in this area thats why I would send it to Florida where they repair them weekly. My hull is the same as yours and i just did a complete overall of my boat last year. Its a 1983 monza.

Monza


I’m not going to touch the out drive questions for obvious reasons, but as far as your tranny goes Tom Huber at Huber Marine is the only one I will work with his # is (615) 794-7583

Tony

www.pulsedrive.net

The best solution to your trs and tranny is to sale it and go with a pulse drive system and then you can put the big horsepower with it. After a year, 600 hp its going to be enough. Trust me Harry 1-800-288-2469.; There is a guy on this forum that showed pictures of the retrofit using the pulse drive system .